DVI Lighting
120 Great Gulf Drive, Concord
Ontario, L4K 5W1 Canada
T: 1 855 384 5483
F: 1 855 384 8435
DVP19370
DVP19371
DVP19372
Chinook
Tools
Phillips head screwdriver
Allen Key
Warning
All electrical connections must be made according to local
codes. If you feel you do not have the experience necessary to
do this, please have your fixture installed by a qualified,
licensed electrician.
Make sure to note the maximum recommended wattage for
your light fixture.
DO NOT EXCEED THE RECOMMENDED WATTAGE:
DVP19370 - 1 x 35W GU10 LED
DVP19371 - 1 x 35W GU10 LED
DVP19372 - 2 x 35W GU10 LED
Cleaning
We recommend that you use a mild detergent, such as dish
washing soap, and warm water to clean the glass and metal
surfaces. After cleaning, make sure to dry the fixture
completely because moisture will corrode the satin finish. Use
a damp soft cloth to wipe off dust. DO NOT use abrasive pads
or cleaning materials.
During installation, some fixtures may require subtle adjust-
ments in order for the fixture to look as intended.
If you have and questions,comments, or concerns
contact us at [email protected]
These instructions are property of DVI Lighting. Do not copy or reproduce.
ASSEMBLY INSTRUCTIONS
Connect the copper ground wire to ground wire - If
you only have two wires coming from the electrical
box, connect the fixture’s copper wire to the green
ground screw on the mounting plate.
Connect the white fixture wire to white supply wire.
Connect the black fixture wire to black supply wire.
A.
B.
C.
1
2
3
A
B
C
Fully seal around 4 edges of
backplate with silicone sealant
between backplate and wall to
prevent water infiltration.
4
