DVDO HDMI-KVM-21, User Manual

Page: 5 / 12

5
DVDO-HDMI-KVM-21_V1.0.0
DVDO
DVDO-HDMI-KVM-21 2x1 HDMI 2.0 KVM Switch User Manual
Introduction
This product is a 2x1 HDMI KVM Switcher with HDMI and HDCP2.2
compatibility. It supports resolutions up to 4K@60Hz 4:4:4, multi-channel audio
and automatic HDCP 2.2/1.4 compatibility. The switcher allows users control
two USB source devices/computers with only one set of USB devices (e.g. USB
mouse, USB keyboard, USB flash and other USB2.0 compliant devices). It
supports switching by buttons on the front panel or IR remote, and provides a
wide compatibility choice for different operating systems, such as Windows,
Mac OS and Linux, no driver required and simple plug and play.
Features

2x1 HDMI KVM switcher with HDMI and HDCP2.2 compliant;

Full 18G bandwidth, up to 4K/UHD @60Hz with 4:4:4 chroma sampling;

Supports three USB-A port for USB keyboard, USB mouse and other
USB2.0 devices to control one of the two computers;

Supports switching the KVM input port by push button on the front panel,
the HDMI input and USB input are switched simultaneously;

Supports one microphone input and one headphone output for audio
application;

Wide compatibility with Windows 10/8/7 XP, Mac OS and Linux;

No driver required and simple plug and play.
Package Contents
Before you start the installation of the product, please check the package
contents as below:

Switcher x 1

DC 5V 1A Power Adapter (with US, UK, EU, AU Pins) x 1

IR Remote x 1

IR Receiver Cable x 1