13
DVDO-HDBVM-POE-1_V1.0.0
DVDO
DVDO-HDBVM-POE-1 4K HDBaseT 2.0 Extender with USB 2.0 User Manual
RS232 Pass-Through
RS232 port can be used for bi-directional RS232 signal pass-through between
transmitter and receiver.
Steps to set up for RS232 Pass-Through:
1. Connect a RS232 Master (or Slave) Device to RS232 port of transmitter
with a RS232 cable.
2. Connect a RS232 Slave (or Master) Device to RS232 port of receiver with
a RS232 cable.
3. Connect HDBT OUT of the transmitter to HDBT IN of the receiver with a
Cat 5e/6/6a/7 cable.
When all is set, RS232 signal can be passed through bi-directionally between
two RS232 devices.
