21
RMO100G Getting started
Rmax function is activated by checking Rmax function checkbox. Rmax value can be set in the range of
0 - 9999 microOhms. If Rmax value is detected, DV-Win RMO software will display notification in status
bar and RMO device will emit specific sound signal.
7.8 Measurement Units
Measurement units in DV-Win RMO software are available via Tools - Measurement units menu.
Resistance measurement values can be shown in: microOhms, miliOhms and Ohms.
Current measurement values can be shown in: miliAmpers and Ampers.
Voltage measurement values can be shown in: miliVolts and Volts.
Measurement results are automatically updated as selected in measurement units window.
7.9 Status Bar
Status bar is located above the measurement results and it is always visible to user. Status bar displays
current state of the RMO device. Depending of the current state status bar will signal one of the
following:
Ready state:
Rmax detection:
Setting test parameters:
Test in progress:
Demagnetization in progress:
Device in cooling down mode:
Error detected (error description):
Download in progress:
