TECHNICAL INFORMATION DW2500X01
This page of the manual describes the installation and operation of the Model DW2500X01
non-catalytic wood heater. This heater meets US Environmental Protection agency’s emission limits
for wood heaters. Under specific conditions this heater has been shown to deliver heat at rates
ranging from 9,600 to 58,000 BTU per hour.
Model No. DW2500X01
This unit has been listed by Warnock Hersey
Limited to meet or exceed ULC S 627-00 Canada
and UL 1482 U.S.
Desired burn rate
Low
Med / High
High
** Approximate BTU output
9,600
16,315
58,000
Inlet air setting
Fully Closed
1/2" (13mm) open
Fully Open
Inlet air settings
** Performance may vary depending on actual home operating conditions.
(See “Helpful Hints” section of this manual)
NOTE: See pages 4 and 5 of this manual for clearances and floor protection information.
A
B
D
L
K
G
J
H
E
C
F
Overall Dimensions
“A”
“B”
“C”
“D”
“ E ”
“F”
“J”
“ L ”
“G”
“K”
44” (1118mm)
31” (787mm)
8-7/8” (225mm)
9-1/4” (235mm)
26-1/4” (667mm)
21-3/4” (553mm)
1 6 - 1 / 4 ” ( 4 1 3 m m )
1 6 ” ( 4 0 6 m m )
1 0 ” ( 2 5 4 m m )
Adjustable 10”(254mm) to 14”(356mm)
20-3/4” (5278mm)
“H”
11
f i r e - p a r t s . c o m