Dutch Pinball DP-069, Technical Support

Page: 7 / 146

Dutch Pinball – Technical Support TBL FAQ rev 0.51
Page 7 Parts and tools rel 0.50
Common parts and Tools required rel 0.50
Tools
When working on your TBL the following ‘special’ tools (compared to a Stern/BW pinball for
instance) are likely needed:
•
Metric nutdrivers and-or wrenches size 5 ; 5,5 ; 7 ; 8 ; 10 mm
•
Torx drivers size TX6 ; TX8 ; TX10 ; TX15 ; TX20 ; TX30
•
Metric Allen keys M2,5 ; M4
Of course, this is besides the usual tools like screwdrivers, pliers, etc.
This list is subject to change.
Parts
Most parts directly related to pinball are common available parts used also with many BW pinballs
and can be bought for instance with Pinball Life.
Examples:
•
Flippercoils FL-11630: https://www.pinballlife.com/williamsbally-fl-11630-flipper-
coil.html?Category_Code=
•
Coilstops are standard BW WPC type A-12390, Pinball Life: Williams/Bally Flipper Coil Stop A-
12390
•
Plungers are standard BW WPC type. Left flipper Pinball Life: Williams/Bally Left Flipper Plunger
and Crank Assembly , right flipper Pinball Life: Williams/Bally Right Flipper Plunger and Crank
Assembly
•
Complete flipper assy. No EOS needed. Coilstop type A-12390, Coil type FL-11630
https://www.pinballlife.com/full-flipper-assembly-for-williamsbally-machines-from-021992-to-
101998.html
•
Complete flipper rebuilt kit, Pinball Life: Flipper Rebuild Kit - Williams/Bally 08/1993-10/1998;
Spooky 2014-2017; JJP 2012-Present; CGC 2014-P
•
Fuses are 5x20 mm Slow Blow fuses: https://www.pinballlife.com/20mm-slow-blow-fuses.html
Values used are 1A, 1.6A, 5A, 6.3A, all slow blow
•
Micro Switches DB5 : https://www.pinballlife.com/williamsbally-sub-microswitch-5647-
12693.html
•
Roll-over Switches: https://www.pinballlife.com/rollover-switch-with-mounting-bracket.html
•
Etc.
This is just a short list to give you an idea what you may need for your TBL. List is also subject to
changes throughout the built which were unknown at the moment of issuing this manual.