Dutch Pinball
–
Technical Support TBL FAQ
rev 0.51
Page 22 bowling operations faq rel 0.86
Bowling pin coil check
If you see a bowling pin is not dropping it can also be caused because the coil of that pin is faulty.
This can be checked in the Testmenu
–
Solenoids.
Remember that for the coils to work in the
Test Menu,
the switch which enables power supply to the
12 & 48 VDC circuits must be enabled!
If you select Bowling Alley you get the following choices:
If you select PINS you can select which pin you want to check. Pin 1 is the one front middle.
All coils can be activated by pushing the Enter button. You will hear and/or see the coil being
activated. If not, something is faulty.
If a coil is not working check the wiring first. If a wrong pin is activated connectors are very likely
swapped.
1
2
3
4
5
6
7
7
8
9
10
