SETUP
USAGE
SUPPORT
1. Loosen Clamp.
2. Place on collar of grinder.
3. Center Dust Shroud on arbor and tighten
clamp.
4. Install spacer if needed.
5. Install grinding wheel.
6. Insert hose in Dust Shroud Pro port.
7. Attach to vacuum.
Dust Shroud Pro comes with a clip mount (7” only).
Front clip slides out so you can use it against
a wall. Note: Always make sure grinder is
UNPLUGGED when removing or attaching
clip.
WARNING
- If using this product in the
removal of lead paint a Dustless HEPA
vacuum must be used. The removal of
old paint may generate dust or fumes that
contain lead. Exposure to lead may cause
brain damage or other adverse health
effects, especially in young children and
pregnant women. Follow all federal, state and
local laws including the U.S. Environmental
Protection Agency’s Renovation, Repair and
Painting law or similar state law.
www.dustlesstools.com
OM019_0417
