Durst Habitat 100H, User Manual, Page: 20 / 28

5 Maintenance and Troubleshooting Habitat 100H
20
2020 © Durst Phototechnik AG, User Manual, Version 12/2020 REV1.6
5.2 Replace UV-C lamps
1. Switch off the device and disconnect the
power cord (1).
2. Remove the maintenance cover (2) on the
back side of the core-unit.
The maintenance cover is attached
magnetically.
3. Unscrew the Phillips head screws (3) to
remove the defect module’s lamp
cover (4).
Illustration shows right module.
4. Remove all lamp retaining plates (5).
Every UV-C lamp is secured by four
retaining plates (5).
1
2
3
4
5
5