9
Eco
Gun 249
COMMISSIONING
Before commissioning the gun must be cleaned from preservative
substances by suitable degreasing agent – flush the gun with solvent
suitable for the coating material to be applied.
The gun is factory adjusted and prime-sprayed (quality
test).
Pressure air is to be supplied through following hose:
»
up to 10 meters -nominal inner diameter 8 mm
»
over 10 meters - nominal inner diameter 9,5 mm
o
Ptions
for
coating
material
suPPly
EcoGun 249 model spraying gun features following supply options:
»
Lower supply -
Fluid connector AM 38
(fitting G 3/8“)
d
irect
connection
of
air
quick
-
couPlings
to
the
gun
The gun design enables connection of air quick-couplings to the
gun. The air input fitting may house the quick-coupling mandrel, e.g.
type SFIW 13 from RECTUS.
The manufacturer recommends to use brand quick-couplings with
low pressure loss and long operating life.
The quick-couplings may be used to the air inlet only
during application of water-based coating materials, which
do not require electro-static drop-in.
ADJUSTING OF GUN
The gun does not require any adjustment, when basic maintenance
requirements are followed. Each gun is factory adjusted and prime-
spayed. Upon disassembly and reassembly due to replacement of
the nozzle assembly or worn components it is necessary to inspect
adjustment of following elements.
Gun 249
Summary of Contents for EcoGun 249
Page 2: ......
Page 23: ...23 EcoGun 249 ...
