Durr Dental VistaScan Net Installation And Operating Instructions Manual Download Page 6

EN

6

 

2011/10

2. Safety 

2.1 General Safety Notes

This appliance has been designed and con-
structed by Dürr Dental so that correct usage of 
the appliance is virtually free of any possible in-
jury or danger� In spite of this, we feel it is our 
duty to mention the following safety measures in 
order to prevent any possible danger�
• When using this appliance all local and rele-

vant regulations must be observed! 
Converting or modifying the appliance in any 
way is strictly prohibited� In such cases, any 
and all guarantees immediately become inva-
lid� The operation of modified appliances can 
be punishable by law� In the interests of trou-
ble-free operation the operator is responsible 
for observing these regulations�

• Before every use the operator must check the 

functional safety and the condition of the 
appliance�

• The operator must be knowledgeable in the 

operation of the appliance�

• The product is not designed to be used in 

medical treatment areas where there exists 
the danger of explosion� Areas where explosi-
ons could occur are those where flammable 
anesthetic material, skin cleansers, oxygen 
and skin disinfectants are present� This app-
liance is not to be used in areas where the at-
mosphere could cause fire�

2.2 Electrical safety instructions

• The appliance may only be connected to a 

correctly installed earthed safety socket�

• Before connecting to the electricity supply the 

appliance must be inspected and checked 
that the supply voltage and the supply fre-
quency correspond to that of the local electri-
cal supply�

• Before initial use and start-up the appliance 

and all supply lines must be checked for any 
signs of damage� Damaged supply lines and 
connections must be replaced immediately�

• Never come into contact with patients and 

open plug-in connections on the appliance at 
the same time�

• When using the appliance observe all the rele-

vant electrical safety procedures�

3. Warnings and Symbols 

In the operating instructions the following war-
nings and symbols have been used:

Information and/or mandatory re-
gulations or prohibitions for the 
prevention of personal injury or sub-
stantial property damage.

Information and/or instructions or prohi-
bitions regarding personal safety or ex-
tensive material damage

Summary of Contents for VistaScan Net

















Reviews: