EN
2011/10
13
14.1 Configure VistaScan Net
VistaScan Net can be configured with the aid of
file "rescue-network�conf"�
This file can be found on the DBSWIN DVD un-
der
Devices\VistaScanNet
�
The network settings of VistaScan Net
can be recalled using this file�
• Store the file on a USB Stick�
• Open the file using any text editor�
• Configure and then save IP-addresses and
network parameters suitable for the current
network structure�
• Place the USB Stick in the USB-Port on
VistaScan Net
• Switch on the VistaScan Net via the appliance
On - Off switch� The data will automatically be
transmitted on start�
• Open WebConfig using one of the configured
IP-addresses� See section 10�1
Example for using"rescue-network.conf"
file
# rescue-network.conf
#
hostname=vsnet
addr1=10.2.20.22
mask1=255.255.0.0
addr2=192.168.0.141
mask2=255.255.0.0
gateway=10.2.0.100
dhcp=off
two_addrs=on
Summary of Contents for VistaScan Net
Page 1: ...EN 9000 618 59 30 2011 10 VistaScan Net Installation and Operating Instructions ...
Page 2: ......
Page 14: ...EN 14 2011 10 ...
Page 15: ......
