Durr Dental VistaCam iX Proxi, Installation And Operating Instructions Manual

Page: 4 / 20

2
9000-618-254/30 1608V003
Other symbols
These symbols are used in the document
and on or in the unit:
Note, e�g� specific instructions re-
garding efficient and cost-effective
use of the unit�
Comply with the specification in the
accompanying documents�
CE labelling
Date of manufacture
Dispose of correctly in accordance
with EU Directive 2012/19/EU
(WEEE)�
Do not reuse�
Application part type B
Steam sterilise at 134 °C
Wear protective gloves�
1.2 Copyright information
All names of circuits, processes, names,
software programs and units used in this
document are protected by copyright�
The Installation and Operating Instructions
must not be copied or reprinted, neither in
full nor in part, without written authorisation
from Dürr Dental�
1 About this document
These installation and operating instructions
form part of the unit�
If the instructions and information in
these installation and operating in-
structions are not followed, Dürr Den-
tal will not be able to offer any war-
ranty or assume any liability for the
safe operation and the safe function-
ing of the unit�
1.1 Warnings and symbols
Warnings
The warnings in this document are intended
to draw your attention to possible injury to
persons or damage to machinery�
The following warning symbols are used:
General warning symbol
The warnings are structured as follows:
SIGNAL WORD
Description of the type and
source of danger
Here you will find the possible con-
sequences of ignoring the warning
i
Follow these measures to avoid
the danger�
The signal word differentiates between four
levels of danger:
– DANGER
Immediate danger of severe injury or
death
– WARNING
Possible danger of severe injury or death
– CAUTION
Risk of minor injuries
– NOTICE
Risk of extensive material/property
damage
Important information
EN