4.8
Distance between rubber feet
Distances between the rubber feet for different
pressure vessel volumes:
b
a
a (cm)
b (cm)
20 l
23
27
50 l
32.5
45
90 l
32.5
59
4.9
Type plate
Complete system
The type plate of the overall system is located on
the mounting plate for the compressor unit.
1
1
Type plate for the complete system
Compressor unit
The type plate of the compressor unit is located
on the crankcase below the cylinder.
1
1
Compressor unit type plate
Membrane drying unit
The type plate of the membrane drying unit is
located on the side of the membrane drying unit.
1
1
Membrane drying unit type plate
4.10 Evaluation of conformity
This device has been subjected to conformity
acceptance testing in accordance with the cur-
rent relevant European Union guidelines. This
equipment conforms to all relevant requirements.
Product description
22
5152100003L02 1910V001
EN
