Durr Dental 6024100001, Installation And Operating Instructions Manual

Page: 16 / 36

8.2 Handover of the device
A factory calibration is performed on the
device at the factory. A printout of these
test results is included in the supplied
documents. This factory calibration does
not replace the initial validation of the
sealing process after commissioning at
the place of installation. To do this, a per-
formance qualification of the sealing pro-
cess must be performed after commis-
sioning (see "14.3 Annual Performance
Qualification").
Correct handover and installation of the device
forms part of the validation process during the
Installation Qualification (IQ). This process must
be documented like every part of the validation.
Please use the enclosed handover record or
download and print it out from www.duerrden-
tal.com and then fill it in.
A new
Installation Qualification
always
needs to be carried out if major changes
are made to general conditions.
9 Configuring the unit
9.1 Selecting the access level
The adjustment options depend on the selected
access level.
Only a qualified expert is permitted to
change the settings in the Service Techni-
cian access level.
Access level Rights
Operator – Querying device information
– Sealing parameters
Administrator In addition to the User rights:
– System settings (administra-
tive)
For operators, e.g. hygiene
officer
Service Tech-
nician In addition to the Administrator
rights:
– System settings (all)
For qualified Service Techni-
cians
❯
Tap System Settings > Access Level .
❯
Select the access level.
❯
Tap to go back.
9.2 Language selection
❯
Tap System Settings > Language .
Language selection:
❯
Select the language and tap Save . Tap
to go back.
9.3 Set the date and time.
The date and time must be set correctly on the
device in order for the batch documentation to
be correct.
You can manually set the date and time or, if the
device is connected to the Internet, you can
obtain the correct time and date from a time
server.
Manual adjustment
❯
Tap System Settings > Date / Time .
Manual adjustment of date and time:
❯
Tap Date .
❯
Adjust the date and tap Save . Tap to go
back.
❯
Tap Time .
Assembly
14 6024100132L02 1906V003
EN