35
Turn breaker ON/ Connect
The breaker is located on the right side of the front power
panel. Flip the breaker up to allow the power to flow to the
receptacles. Connect your devices to the receptacles on the
front panel. Start with the largest loads first.
8.
Open choke
Push the choke to the “OPEN” position as the engine warms
up.
7.
Pull the recoil start
The recoil start is located on the left side panel next to the air
filter. Pull the recoil handle slowly until resistance is felt, then
quickly pull the recoil handle until fully extended.
6.
CAUTION
: Release the recoil handle only after
the cord has retracted. Releasing the recoil
handle while extended may cause harm to
yourself or your
equipment.
Turn idle control OFF
The idle control is located on the top center of the main
power panel. Turn the switch “OFF” to prevent the unit from
trying to idle down before the engine is warmed up.
5.
