Page 24 from 37
7
Problems and solutions
No pellet supply
The stove does not feed pellets.
Possible causes:
-
One of the protection sensors is switched on, this can be the maximum
thermostat (see component 10.1.7) or the pressure switch (see component
(10.1.6).
-
The auger motor (see component 10.1.4) is faulty.
-
The auger (see component 10.1.5) is jammed or blocked.
-
No pellets in the pellet container
No ignition
The stove measures the temperature rise of the flue gas by means of the flue
gas temperature sensor (component 10.1.12). If these do not rise fast enough,
Figure 5- Fan removal
Figure 4- Igniter Removal
