LS-5
®
MACHINERY DIVISION
©
2005 Duro Dyne Corporation
Printed in USA 02/2005
BI028075
DUCT LINER
SIZER
LS-5
Duct Liner Sizer
MACHINERY
DIVISION
OWNER’S
MANUAL
LS-5
LS PARTS & SPECIFICATIONS
ITEM#
DESCRIPTION
LS-4
LS-5
(4’’)
(5’’)
ITEM#
DESCRIPTION
LS-4
LS-5
(4’’)
(5’’)
28009 28009 Blade
28012 28012 Cross Cut Assembly
(Without handle)
28013 28013 Blade with Hub
28014 28014 Crank Handle
28015 28015 Slitting Assembly W/ Blade Roller
28016 28017 Measuring Tape
28018 28019 Liner Spool
28025 28025 Slitter Support Casting
28026 28026 Blade Hub
28027 28027 Spring Hold Downs
28028 28029 Slitter Drive Shaft
28030 28030 Blade Roller
28031 28031 12” Octagon Collar
28032 28033 Pipe
28038 28039 Drive Roller
28040 28041 Idler Roller
28042 28042 Feed Guide
28043 28043 Locking Thumbscrew
28047 28047 Handle Grip
28058 28058 Nylon roller
28059 28059 Nylon Roller Bolt
28060 28060 Blade Hub Bolt
28066 28066 Adjustment Knob
28067 28068 Feed Shelf
28069 28069 Roller Handle
28070 28070 Sprockets
28071 28071 Chain
28072 28073 Cross Cut Handle
28061 28061 Sandpaper Kit
ADJUSTMENTS & MAINTENANCE
1)
LUBRICATION: The bearings at each end are made of porous bronze. They may be lubricated
with a light oil.
2)
The cross bar which supports the slitting assemblies should be lubricated as needed with
a dry lubricant.
3)
Replacement blades and parts can be ordered from your Duro Dyne Distributor.
4)
If any slippage occurs or more pressure is required to feed oversized or heavier rolls,
simply push up slightly on the Idle Roller Handle while turning the crank arm.
LIMITED WARRANTY
Duro Dyne Machinery is manufactured by skilled mechanics, utilizing the latest production
techniques. Each unit has been rigorously tested prior to packaging and shipment in order to
ensure trouble free operation.
Your Duro Dyne machine has a 90 day warranty against defects in workmanship or material.
Any component found to be defective will be repaired or replaced, at manufacturer’s discre-
tion, at no cost, if faulty component is returned freight prepaid to the nearest Duro Dyne
Service Department. Warranty does not apply to expend able parts, cutting blades, etc, of
repairs, due to improper maintenance or operational procedures.
All warranty claims must be accompanied by the serial number, date of purchase, and the
name of distributor purchased from.
Liner Spool
4’ #28018
5’ #28019
Frame Only
4’ #28022
5’ #28023
Crank Handle
#28014
Slitting Assembly
(With Blade Roller)
#28015
Cross Cut Handle
4’ #28072
5’ #28073
Cross Cut Assembly
(without handle)
#28012
Feed Guide
#28042
Cross Cut Assembly
(without handle)
#28012
Measuring Tape
4’ #28016
5’ #28017
Idle Roller
4’ #28040
5’ #28041
Drive Roller
4’ #28038
5’ #28039
Feed Shelf
#28067
Roller
Handle
#28069
PARTS IDENTIFICATION
Cutting Head
(Top View)
ShopRPMachinne
