Maintenance work
Service manual H867 Version 00.0 - 08/2013
83
20 Maintenance work
20.1 Pneumatic system
20.1.1 Setting the operating pressure:
Correct setting
The operating pressure is 6 bar.
Check the pressure on the pressure indicator every day. The pressure
must not deviate from the reference pressure by more than 1 bar.
Figure 68: Setting the operating pressure
Setting steps
1. Pull the turning handle (1) up.
2. Turn the turning handle until the pressure indicator (2) indicates 6 bar:
•
To the right
: To increase pressure
•
To the left
: To reduce pressure
3. Push the turning handle (1) down.
Machine damage due to incorrect pressure
An incorrect pressure can cause damage to the machine. Make sure
that the machine is only used when the operating pressure is set cor-
rectly.
ATTENTION
0
2
8
4
6
10
2
1
(1) - Turning handle
(2) - Pressure indicator
Summary of Contents for M-TYPE H867
Page 1: ...H867 Service manual...
Page 91: ......
