Dürkopp Adler D669, Operating Instructions Manual

Page: 97 / 226

Programming
Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020 95
5.6.7 Using bobbin wind mode
A bobbin can be wound without sewing. You can choose if you
want the winding process to stop automatically when the bobbin
is full or not until the bobbin shaft has completed a certain number
of rotations.
To use bobbin wind mode:
1. When setting up the user interface (

p. 69 ), drag the tile
for bobbin wind mode onto the main screen.
2. Press to return to Manual mode.
3. Press on the bobbin wind mode symbol and choose between
Lever
and
Turns
.
4. Define and confirm the settings.

Bobbin wind mode begins.
5.7 Using Automatic mode
Automatic mode is comprised of all stored programs.
To access the Automatic mode:
1. Press the symbol to bring up the navigation pane.

This opens the navigation interface.