Dürkopp Adler D669, Operating Instructions Manual

Page: 22 / 226

Operation
20 Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020
4.2 Switching on and off the machine
Fig. 2: Switching on and off the machine
Switching on the machine
To switch on the machine:
1. Press the switch (2) on the rear of the control to position I .

The button (1) on the front of the control illuminates red.
2. Press the button (1) on the front of the control.

The control and the control panel of the machine start up.
3. Press the pedal backwards when prompted to do so on
the display.

The machine performs a reference run and is afterwards
ready for sewing.
Switching off the machine
To switch off the machine:
1. Press the button (1) on the front of the machine.

Control and control panel shut down and are set to standby;
the button (1) illuminates red.
2. If necessary, press the switch (2) on the rear of the control
to position
O .

The machine is no longer set to standby.
(1) - Button (2) - Switch
① ②