Dürkopp Adler 806N-111, Operating Instructions Manual

Page: 128 / 162

Packaging and transport
126 Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
9.1.2 Assembling the transport lock on the edge folding station
To assemble the transport locks:
1. Depressurize the machine and place it in the Safe stop mode.
2. Remove all covers above the tabletop (

p. 109 ).
3. Place the machine in the shape changing mode (

p. 85 ).
4. Press the EMERGENCY STOP button.
5. Acknowledge the error message and shut down the PC.
6. Switch off the machine at the main switch.
7. Fasten the polystyrene foam between the protective bar and edge
folding frame.
8. If necessary, use tape or cable ties to fasten the middle slide carriage
and edge folding frame.

The edge folding station components are fastened for transport.
9.1.3 Assembling the stacker transport locks
To assemble the transport locks:
1. Depressurize the machine and place it in the Safe stop mode.
2. Remove all covers above the tabletop (

p. 109 ).
3. Use tape or cable ties to fasten the stacker bar to the stacker.
4. Fold the stacker to the machine and tape it to the frame.

The stacker is fastened to the machine.
9.1.4 Assembling the transfer carriage transport locks
To assemble the transport locks:
1. Depressurize the machine and place it in the Safe stop mode.
2. Remove all covers above the tabletop (

p. 109 ).
3. Activate the integrated EMERGENCY STOP switch on the transfer
carriage: Press the EMERGENCY STOP switch in on the right.
4. Slide the transfer carriage all the way to the left.
5. Tape the transfer carriage to the machine frame and the edge folding
frame.

The transfer carriage is secured for transport.
9.1.5 Securing power cable and pedal for transport
The power cable and pedal are permanently assembled to the machine.
They can be stored in the area behind the control. Remove the rear cover
below the table level to store the cable more easily.