Dürkopp Adler 667 PREMIUM, Service Instructions Manual, Page: 25 / 150

Working basis
Service Instructions 667 PREMIUM - 03.0 - 01/2018 23
Important
The machine needs to be restarted after a change of the maximum stitch
length.
If necessary, set the maximum permissible stitch length via the software.
Check the feed dog position in its movement at maximum stitch length
(depending on the equipment: 6 or 9) by turning on the handwheel.
The feed dog must not hit against the throat plate.
Order
Then check the following setting:
• Feed dog (

p. 34 )
3.4.7 Removing the oil pan
Fig. 11: Removing the oil pan
To remove the oil pan:
1. Tilt the machine head (

p. 17 ).
2. Loosen the screws (2).
3. Remove the oil pan (1).
(1) - Oil pan (2) - Screws
①
②