Dürkopp Adler 667 PREMIUM, Service Instructions Manual

Page: 108 / 150

Programming
106 Service Instructions 667 PREMIUM - 03.0 - 01/2018
Test Pedal
subitem
This subitem is used to check the various pedal positions of the analog
pedal (X6b). The positions are indicated by measured and automatically
calculated calibration values.
Fig. 69:
Test Pedal
subitem
Test Fabric Sen
subitem
Use this subitem to test the functionality of the material thickness detection.
Fig. 70:
Test Fabric Sen
subitem
14.8.2 Setting the Service routine (
Adjustments
) parameter
The
Adjustments
parameter is not explained in greater detail here,
because it is closely to the area of the mechanics. Details on that area can
be found in the Service routine chapter (

p. 14 ).
14.8.3 Setting the Calibration (
Calibration
) parameter
Various parameters need to be calibrated – they are explained in more
detail in the table. A detailed description of the calibration is given after the
table.
Digital :
Analog :
0
278
0:
Max:
-1:
-2:328
175
275
918
Digital :
Analog :
0
278
0:
Max:
-1:
-2:328
175
275
918
Tens :
FLPos:
20
0.0 Stroke:
Pressu:
Speed :
2.5
3
0
Menu item Explanation Reference
Feed Cal.Main
Calibration of the stitch length and/or the feed

p. 107
Mat.Thickness
Calibration of the material thickness detection

p. 108
Man.St.Len.
Calibration of the stitch adjustment lever (optional
equipment)

p. 108
EdgeGuide
Calibration of the edge guide (optional equipment)

p. 108
Pedal
Calibration of the pedal

p. 109