Dürkopp Adler 650-16, Operating Instructions Manual

Page: 48 / 150

Control with the OP3000 control panel
46 Operating Instructions 650-16 - 02.0 - 08/2016
5.5.1 Before starting sewing
Symbol Meaning
Quick programming (depending on the assignment)
• Press the upper softkey
Quick access function (softkey menu)
• Press the lower softkey
Program number
Value range: 000 to 999
• Use

/

to select the
Program
parameter.
• Use

/

to change the program number.
Or:
• Input the program number using the 0 - 9 keys
and confirm with OK as required.
If you select program 000, the control selects Manual
mode
Right sleeve / left sleeve
The machine can sew only right sleeves, only left slee-
ves, or right and left sleeves alternately
• Use

/

to select a right sleeve or a left sleeve
(if programs exist for both).
Steps
Number of steps contained in the current program.
Stitch length
Value range: 1.0 to 5.5 mm
The stitch length can be altered before starting sewing.
The altered value applies throughout the entire sewing
program.
• Use

/

to select the
Stitch length
parameter.
• Use

/

to adjust the stitch length.
Thread tension
Value range: 1 to 99
The thread tension can be altered before starting
sewing.
The altered value applies throughout the entire sewing
program.
Use

/

to select the
Thread tension
parameter.
• Use

/

to change the thread tension