Dürkopp Adler 650-16, Operating Instructions Manual

Page: 46 / 150

Control with the OP3000 control panel
44 Operating Instructions 650-16 - 02.0 - 08/2016
5.4.3 Sewing process
Sewing without fullness
To sew without fullness:
1. Input values for stitch length, thread tension, curve support
and foot alternation.
2. Push the pedal forwards and sew.
Sewing with fullness
To sew with fullness:
1. Change the fullness with the left pedal (optional)
(if set at the technician level).
OR
2. Alter the fullness using the 0 to 16 and +/- keys.
Altering parameters whilst within the seam
To alter parameters whilst within the seam:
1. Move the pedal to the 0 position.
2. Change the desired parameter on the control panel.
3. Push the pedal forwards again and sew.

The seam will be sewn using the altered parameter value.
Start Tack (bartack at the start of a seam)
Value range: on/off
End Tack (bartack at the end of a seam)
Value range: on/off
Thread Trim (thread cutoff)
Value range: on/off
Symbol Meaning