Dürkopp Adler 650-16, Operating Instructions Manual

Page: 40 / 150

Control with the OP3000 control panel
38 Operating Instructions 650-16 - 02.0 - 08/2016
5.2 Switching on the machine
Fig. 16: Switching on the machine (1), Display of the firmware and Soft-
ware version
To switch on the machine:
1. Switch on the main switch.

The software version appears on the display:
• On the left of the screen the control panel firmware
• On the right of the screen the control software version

The machine performs a reference run:
The display shows the program last used, or manual mode.
Fig. 17: Switching on the machine (2), Display of the program last used

Decrease the value
Scroll through the list (downwards)
A Upper softkey - 1
Assignment is different for each menu
B Upper softkey - 2
Assignment is different for each menu
+/- Switch between increase and decrease the fullness
Key Function