Dürkopp Adler 650-10, Operating Instructions Manual

Page: 46 / 176

Service settings via software (OP3000)
Operating Instructions 650-10 - 03.0 - 08/2016 44
Assign a function to the upper softkey as follows:
1. Press the numeric key under the desired function
and the upper softkey at the same time.

The function is assigned to the upper softkey
and can be called up by pressing the key.
5.3.2 Menu for other settings
1. Use

/

to select the field .
2. Press the OK key.
3. Use

/

to select the desired parameter.
4. Press the OK key to select the parameter.
5. Change values using the

/

keys.
6. Press the OK key to confirm.
7. Press

or ESC to exit the menu.
Symbol Meaning
Alternate (sewing foot alternation)
Value range: 0.0 – 2.5 mm
Foot Press. (sewing foot pressure)
Value range: 1 – 10
Start Tack (bartack at seam beginning)
Value range: 1 (= on) or 0 (= off)
End Tack (bartack at seam end)
Value range: 1 (= on) or 0 (= off)
Thread Trim (thread cutter)
Value range: 1 (= on) or 0 (= off)