Dürkopp Adler 1767, Service Instructions Manual

Page: 125 / 128

Technical data
Service Instructions 1767 - 00.0 - 12/2016 123
24 Technical data
Data and characteristic values
Characteristics
The machines are equipped with an extra large (XXL) vertical hook.
The remaining thread length following the thread cutting process is,
respectively, approx. 15 mm and approx. 5 mm without and with the short
thread cutter.
A safety snap-on coupling prevents any misadjustment or damage to the
hook in the event of a thread jamming.
Automatic lubrication system for lubricating the machine and the hook.
All subclasses are equipped with a bar holding 6 push buttons. An additional
button panel has been placed within easy reach of the sewer and allows the
sewer to assign the same 6 functions of the buttons housed in the button
bar.
Technical data Unit Class
Machine type 1767
Type of stitches Double lockstitch 301
Hook type Vertical hook, XXL
Number of needles 1-2
Needle system 134-35
Needle strength [Nm] 90-180
Thread strength [Nm] 120/3 - 10/3
120/3 - 15/3
Stitch length [mm] 9
Speed maximum
[min
-1
]
3000
Speed on delivery
[min
-1
]
3000
Mains voltage [V] 250
Mains frequency [Hz] 50/60
Operating pressure [bar] 6
Length [mm] 690
Width [mm] 220
Height [mm] 460
Weight [kg] 59
Power input [kVA] 0.75