DURKOPP ADLER beisler 2112-5, Service Instructions Manual

Page: 52 / 104

Programming
50 Service Instructions 2112-5 - 00.0 - 02/2020
8.4.10 Copying variables to the memory stick
To copy variables (global parameters/special parameters) to the memory
stick:
1. Plug the memory stick into the USB port.
2. Press the key.
3. Press the Init parameters key.
4. Press the Machine <-> Stick key.
5. Press the Machine memory <-> Stick key.
6. Confirm the safety prompt.
7. Press the key.
8.4.11 Downloading variables from the memory stick
Important
If this function is used to download all variables from the memory stick to
the program control, ALL current seam programs will be overwritten.
To copy variables (global parameters/special parameters) to the memory
stick:
1. Plug the memory stick into the USB port.
2. Press the key.
3. Press the Init parameters key.
4. Press the Machine <-> Stick key.
5. Press the Stick -> Machine memory key.
6. Confirm the safety prompt.
7. Press the key.