DURKOPP ADLER beisler 2112-5, Service Instructions Manual

Page: 51 / 104

Programming
Service Instructions 2112-5 - 00.0 - 02/2020 49
8.4.8 Copying a seam program to the memory stick
To copy a seam program to the memory stick:
1. Plug the memory stick into the USB port.
2. Press the key.
3. Press the Init parameters key.
4. Press the Machine <-> Stick key.
5. Press the Active seam -> Memory stick key.
6. Enter the desired seam number on the numeric keypad.
8.4.9 Downloading a seam program from the memory stick
To restore or change seams, you can download seam programs from
the memory stick.
For this purpose, an unused location is selected or an existing seam
program is overwritten.
To download a seam program from the memory stick:
1. Plug the memory stick into the USB port.
2. Press the key.
3. Press the Init parameters key.
4. Press the Machine <-> Stick key.
5. Press the Stick -> Active seam key.
6. Enter the desired seam number on the numeric keypad.