DURKOPP ADLER beisler 2112-5, Service Instructions Manual

Page: 30 / 104

Setting up the machine
28 Service Instructions 2112-5 - 00.0 - 02/2020
7.4.2 Aligning the folder with the pick-up plate
Proper setting
To ensure that the folder can pick up the pocket facing evenly, the folder
must lie evenly on the pick-up plate along its entire length when it is
lowered.
Fig. 16: Aligning the folder with the pick-up plate
To align the folder with the pick-up plate:
1. To fix the pick-up plate (7) in place, turn the adjusting wheel (6) all
the way into the minus range.
2. Move the folder (1) onto the pick-up plate (7).
To do so, use the input/output control functions
• Move the folder to the right
• Lower the folder
3. Loosen the screws (3) on the bottom side of the worktable.
4. Rotate the bracket (4) at the holder (5).
 The inclination of the pick-up plate (7) is such that the folder (1) lies
evenly on the pick-up plate (7).
5. Tighten the screws (3).
(1) - Folder
(2) - Screws
(3) - Screws
(4) - Bracket
(5) - Holder
(6) - Adjusting wheel
(7) - Pick-up plate
(8) - Folder rail
②
①
③
④
⑤
⑥
⑦
⑧