DURKOPP ADLER 991-210-10 Series, Service Instructions Manual

Page: 121 / 150

Programming
Service Instructions 911-210-10 - 00.0 - 06/2020 119
3. Enter the desired value (300 - 2000 rpm).
4. Press the button.

The window for entering the cutting speed opens.
5. Enter the desired value (70 - 500 rpm).
6. Press the button.

The sewing motor runs at the entered speed.
7. Press the button.

The sewing motor stops.
8. Press the button.

The sewing motor runs at the entered speed.
9. Press the button.

The sewing motor stops, and the thread trimmer is actuated.
16.13.4 Calling up log displays and error lists
You can access the log settings and error lists via
Extras
>
Service
>
System-Information (System Information) .
To call up log displays and error lists:
1. Press the menu items Extras > Service > System-
Information (System Information)
.

The selection screen for system information appears.
Fig. 93: Calling up log displays and error lists
2. Press the desired symbol.