DURKOPP ADLER 991-210-10 Series Service Instructions Manual Download

Page: 107 / 150

Programming

Service Instructions 911-210-10 - 00.0 - 06/2020

105

Press the

Datei kopieren (Copy File)

button.



The selected file is copied to the USB key or the control.

16.10.8 Deleting a seam program or seam sequence

Seam programs or seam sequences that are no longer required can be
deleted from the control.

To delete a seam program or a seam sequence:

Press the menu items

Datei (File)

Löschen (Delete)



The window for selecting the file to be deleted appears:

Fig. 85: Deleting a seam program or seam sequence

Information

You can use the

Dateifilter (File Filter)

to make the list

more manageable (



p. 78

Press the desired file.



The selected file is highlighted with a dark background.

Press the

Löschen (Delete)

button.



The selected file is deleted.

Summary of Contents for 991-210-10 Series























































































































































Search results

Summary of Contents for 991-210-10 Series

Reviews:

Related manuals for 991-210-10 Series

Brands by name

Popular brands

DURKOPP ADLER 991-210-10 Series, Service Instructions Manual

Search results

Summary of Contents for 991-210-10 Series

Reviews:

Related manuals for 991-210-10 Series

Brands by name

Popular brands