DURKOPP ADLER 991-210-10 Series, Service Instructions Manual

Page: 106 / 150

Programming
104 Service Instructions 911-210-10 - 00.0 - 06/2020
4. Enter the desired name and adopt the change by pressing
OK (CR) (

p. 79 ).

The seam program or seam sequence is now available under this
name for sewing, editing or copying.
16.10.7 Copying a seam program or seam sequence
You can also copy seam programs or seam sequences from a USB key to
the control or from the control to a USB key.
Important
Not all commonly available USB keys are suitable for the copying process.
You can obtain a suitable USB key from Dürkopp Adler.
To copy a seam program or a seam sequence:
1. Press the menu items
Datei (File)
>
Kopieren (Copy)
.

The window for selecting the file to be copied appears:
Fig. 84: Copying a seam program or seam sequence
2. Use the buttons (1) to select whether the data is to be copied from
the DAC control or the USB key.

The selected button is highlighted with a dark background.
The files present at this location are listed in a selection window (2).
Information
You can use the
Dateifilter (File Filter)
to make the list
more manageable (

p. 78 ).
3. Press the desired file.

The selected file is highlighted with a dark background.
(1) - Select the source to be copied (2) - File selection window
① ②