DURKOPP ADLER 911-211, Service Instructions Manual

Page: 110 / 200

Programming
109 Service Instructions 911-211 - 02.0 - 10/2016
6.9 Resetting the counter
Depending on the machine parameter settings, the counter counts the
sewn programs or sequences up or down. You can use the
Zähler-Reset
(Reset Counter) button to reset the counter to the start value (

p. 130 ).
To reset the counter:
1. Tap the button Zähler-Reset (Reset Counter) on the start
screen.

The counter is reset to the value defined in the machine parameters.
6.10 Creating a new seam program
New seam programs are created using a Teach-In procedure.
Individual seam paths with specific seam parameters are defined via the
operating terminal in order to do this.
To create a new seam program:
1. Tap the menu items
Datei (File)
>
Neu (New)
>
Nahtprogramm (Seam Program) .

The Teach-In window appears.
Fig. 93: Creating a new seam program
(1) - Cursor position
(2) - Cursor
(3) - Arrow buttons
(4) - OK button: Übernahme (Accept)
(5) - Speichern (Save) button
(6) - Löschen (Delete) button
(7) - Parameter button
(8) - Linienauswahl (Line selection) button
②
③
④
⑤
⑥
⑦
⑧
①