DURKOPP ADLER 911-211-10, Operating Instructions Manual

Page: 67 / 134

Programming
Operating Instructions 911-211-10 - 00.0 - 10/2020 65
The existing seam programs are displayed at the right side of the screen.
The
Sequence field on the left shows which seam programs have been
transferred to the seam sequence.
2. Press the desired seam program.

The selected seam program is highlighted with a dark background.
3. Press the Insert button.

The seam program is transferred to the seam sequence and is
displayed in the
Sequence field on the left side of the screen.
4. Add further seam programs in the same manner.
Removing a seam program from a seam sequence
To remove a seam program from a seam sequence:
1. Press the seam program in the
Sequence
field and then press
the Delete button.

The seam program is removed from the seam sequence.
Assigning a name to a seam sequence
To assign a name to a seam sequence:
1. Press the Set name button.

The window for entering the name of the seam sequence opens.
2. Enter the desired name and adopt the change by pressing
OK (CR) (

p. 43 ).

The seam sequence is now available under this name for sewing,
editing or copying.
5.10.5 Editing a seam sequence
You can edit an existing seam sequence by adding or removing seam
programs.
To edit a seam sequence:
1. Open the seam program you wish to modify via the menu items
File
>
Open
.

The seam sequence opens on the start screen.
2. Press the menu items
Edit
>
Sequence
.

The window for editing the seam sequence appears.