DURKOPP ADLER 911-211-10, Operating Instructions Manual, Page: 61 / 134

Programming
Operating Instructions 911-211-10 - 00.0 - 10/2020 59
6. Select the desired technology operation(s) for the new seam path
(

p. 40 ).
7. Confirm the selection with OK .

You are returned to the detail window with the modified contour.
8. Press the Next button.

A query dialog is displayed, asking if you wish to adopt the changes.
Confirm the prompt with
YES to save the modified contour.
Important
Always perform a contour test after modifying a contour to ensure that the
new seam path lies within the permissible sewing field (

p. 56 ).
Changing seam program parameters
You can change the general settings that apply to the entire seam
program.
To change the seam program parameters:
1. Press the menu items Edit > Seam program > Parameters .

The window for selecting the program parameter group appears:
Fig. 43: Changing seam program parameters
2. Press the desired parameter group.

The individual parameters of this group are displayed.
3. Press the desired parameter.

The window for modifying the parameter value opens.
4. Set the parameter to the desired value (

p. 44 ).