DURKOPP ADLER 911-210-3020-10, Operating Instructions Manual, Page: 36 / 128

Programming
34 Operating Instructions 911-210-10 - 00.0 - 06/2020
5.1 Structure of the software
You can create and manage seam programs and sequences via software.
During sewing, these programs are called up and processed stitch by stitch.
Information
Seam program:
A seam program consists of a seam contour with parameters defining
the individual contour sections.
Up to 99 seam programs can be stored in the system.
Seam programs have a file suffix of .
fnp911
after the filename.
Seam sequence:
Up to 30 seam programs can be combined in any order to form a seam
sequence.
Up to 20 seam sequences can be stored in the system.
Seam sequences have a file suffix of .
seq911
after the filename.
The software is also used to define general settings that apply to all pro-
grams. There are also technical menu items for testing and maintaining
the machine.
5.2 Overview of the menu structure
The following table provides an overview of the menu structure and
the function buttons on the start screen.
Menu items in popup menus
Menu item Function Sub-items Sub-items Described on
Datei (File) Open existing programs
for sewing
Create new programs
and copy or delete
existing programs. Löschen (Delete)

p. 69
Kopieren (Copy)

p. 68
Öffnen (Open)

p. 46
Neu (New) Nahtprogramm
(Seam program)

p. 53
Nahtsequenz
(Seam sequence)

p. 65
Speichern unter
(Save As)

p. 67
Bearbeiten
(Edit) Define general settings
for all programs or
modify an existing
program. Maschinenparameter
(Machine parameters)

p. 70
Sequenz (Sequence)

p. 65
Nahtprogramm
(Seam program) Parameter

p. 59
Konturanpassung
(Contour adjustment)

p. 57
Konturtest
(Contour test)

p. 56