DURKOPP ADLER 755 A, Service Instructions Manual, Page: 306 / 498

Programming
304 Service Instructions 755 A/756 A - 00.0 - 02/2019
To set the securement of the right seam end:
1. Press the desired button.
2. Enter the desired value using the numeric keypad.
3. Confirm with
OK .
Set securement seam end right needle
Information
The settings in subitem
Securement seam end right needle
are
adopted automatically from the settings for the
Securement seam end
left needle
( 
p. 303
).
Symbols Meaning
Select stitch condensing
• Set stitch length for stitch condensing at seam end
(0.5 - 4.5 mm)
• Set number of stitches for stitch condensing at seam end
(0 - 10)
Select single tack
• Set stitch length for single tack at seam end
(0.5 - 4.5 mm)
• Set number of stitches for single tack at seam end
(0 - 10)
Select double tack
• Set stitch length for double tack at seam end
(0.5 - 4.5 mm)
• Set number of stitches for double tack at seam end
(0 - 10)