DURKOPP ADLER 610-10, Operating Instructions Manual

Page: 110 / 148

Setup
Operating Instructions 610-10/630-10 - 01.0 - 01/2021 108
7.9 Carrying out a test run
When setup is complete, perform a test run to check the function-
ality of the machine.
To perform a test run:
1. Insert the power plug.
2. Thread needle thread (

p. 23 ).
3. Thread looper thread (

p. 25 ).
4. Switch on the machine.
5. Position the sewing material.
6. Start the sewing process at low speed and then continuously
increase the speed.
7. Check that the seams conform to the desired requirements.
If they are not, set the thread tension (

p. 31 ).