DURKOPP ADLER 512-211-01, Service Instructions Manual

Page: 69 / 82

Maintenance
Service Instructions 512-211-01/532-211-01 - 00.0 - 06/2016 67
13.2.2 Lubricating with grease
Allowing the machine to operate at peak efficiency requires that its moving
parts be lubricated sufficiently.
Lubrication points on the rear of the machine
Abb. 38: Lubrication (1)
1. Apply an adequate amount of grease to the fleece (2) to lubricate the
outer side of the cam disk (1).
2. Apply a small amount of grease to the joints (3) to ensure they remain
flexible.
Abb. 39: Lubrication (2)
3. Apply a small amount of grease to the inner guide groove (5) and the
roller (4) from the outside.
4. Apply a small amount of grease to the joints (6).
(1) - Cam disk
(2) - Fleece
(3) - Joints
(4) - Roller
(5) - Guide groove
(6) - Joints
①
②
③
⑥
④
⑤