DURKOPP ADLER 512-211-01, Service Instructions Manual

Page: 59 / 82

Service settings via software
Service Instructions 512-211-01/532-211-01 - 00.0 - 06/2016 57
12.2 Accessing the technician level
All of the settings in the service area are performed at the technician level.
12.2.1 Editing parameters in level 1
Prerequisite:
• The machine is in the programming mode, the LED in the Ready button
is off.
1. Press and hold the Memory button for 3 seconds.

The controller beeps 1x; the LED in the button illuminates.
The
Program display shows the parameter numbers; the Function
display shows the parameter values.
2. Press the +/- Program buttons to select other parameters.
(3) Memory button
Processes the memory functions.
(4) Reset button
Deletes an error and restores settings.
(5) Ready button with LED
Change between programming and sewing mode.
LED on = sewing mode
LED off = programming mode
(6) Error LED
LED on = error
(7) Program display
Displays parameters.
(8) +/- Program buttons
Changes parameters and navigates forwards/backwards.
(9) Function display
Displays values of selected functions/programmes.
(10) +/- Function buttons
Changes values of functions/programmes.
(11) Selection button
Selects various functions. The corresponding function LED
illuminates.
(12) Sewing pattern memory buttons
Saves sewing patterns.
Button / LED Pos. Function