DURKOPP ADLER 512-211-01, Service Instructions Manual

Page: 14 / 82

Work principles
12 Service Instructions 512-211-01/532-211-01 - 00.0 - 06/2016
3.3 Removing the covers
In many types of setting work, you will have to remove the machine covers
first in order to access the components.
Described here is how to remove the individual covers and how to reattach
them. Just the cover that needs to be removed is then specified in the text
for that particular type of setting work.
3.3.1 Access to the machine bottom section
In order to access the components at the machine bottom section, you
must first tilt the machine upper section to the left.
Fig. 1: Tilting the machine upper section to the left and setting it upright
NOTICE
Property damage may occur!
Machine damage and malfunctions can be caused by laying the
cables incorrectly.
Excess cabling may obstruct moving machine parts in their ability to
function correctly. This will affect the sewing function and may cause
damage.
Lay excess cabling as described above.
WARNING
Risk of injury from moving parts!
Crushing possible.
Switch the sewing machine off before you remove
the covers or refit them.
(1) - Machine upper section
①