Setting up the
9840 Load Cell Indicator
To turn on the 9840 Load Cell
Connector, reach behind in the back
corner and flip the switch up.
Before starting anything, be sure to first
plug in the sensor(s) you will be using.
In starting out, you will see
“>User Data Entry” on the screen.
To enter setup mode, press the two end
buttons at the same time (
◄
and
►
).
(1)
(2)
(3)
As it starts up, you will see a series of
screens introducing you to the 9840 Load
Cell Connector and displays of the
settings from its last use.
(4)
7418 East Helm Drive • Scottsdale, Arizona 85260 • 480.948.5555 • www.interfaceforce.com
Page 1 of
7
Setup Guide
9840 v
1.1
0
9
-
18
-2018
