MAL_Starck_S19721/16.12.1
1
2
3
4
A 110V GFCI outlet is required.
Mark the holes to be drilled for
the anchors.
Using a 3/8“ drill bit, drill the
anchor holes that have been
marked.
Detach mirror front with four
screws.
Lift the mirror up and slide the
mirror backing.
LIft the mirror backing up and
onto the mountain brackets.
Check the mirror backing is
leveled.
5
6
7
8
The top screw will adjust closer
and further. From the mirror,
lower screw will adjust up and
down.
Mark the hole to be drilled.
Remove mirror backing.
Using 3/8“ drill bit, drill the
anchor holes that have been
marked. The plastic anchor
provided is for concrete wall
applications.
