DURAVIT SensoWash 611000001501300, Mounting Instructions

Page: 4 / 16

Important information
en
4
70300083_MAL_SensoWash_Slim_PP_RE_TW
> If the supply cord on this unit is damaged, it
must be replaced by the manufacturer, the
service agent or similarly qualified persons
in order to avoid a hazard.
> Appliances have to be correctly grounded.
> The product itself does not have electrical
leakage protection function, it must be
installed in circuit where there is leakage
protection device installed.
> Means for disconnection must be
incorporated in the fixed wiring in
accordance with the wiring rules and
having a contact separation in all poles that
provide full disconnection under overvoltage
category III conditions.
> Wire specification of cable is cross section
1 – 2.5 mm
2
(17 – 14 AWG).
> Confirm that the grounding wire is
10 mm (⅜") longer than the L and N wire.
Mounting instructions
Please read pre-installation information
sheets prior to the installation. These are
available to download at
www.duravit.com.
1
Checking the installation requirements
The installation of the WC ceramics with
pre-installation of the shower-toilet water
and power supplies is described in
separate instructions.
> Confirm that the electric connection box
must be fixed on wall before installation.
> Ensure that the supplies and WC
ceramics have been installed and
mounted according to the instructions
and regulations.
35
Testing
> Connect the power and water supply.
> Confirm that the product functions
properly according to the operating
instructions.
Mounting instructions information
These mounting instructions come as part of
the Duravit shower-toilet and should be read
carefully prior to installation.
Explanation of the key words and symbols
DANGER
Indicates a hazardous situation
which, if not avoided, will result
in death or serious injury.
NOTICE
Is used to address practices
not related to physical injury.
Link to the mounting information in
this section
Target readership and qualifications
The shower-toilet and associated water
connection should only be installed by qualified
plumbers. The electrical installation should
only be carried out by qualified electricians.
NOTICE
Risk of product and/or
property damage!
> Observe the local installation regulations and
any country-specific standards at all times.
NOTICE
Risk of product damage due
to freezing water!
> Do not install the shower-toilet in rooms at
risk of frost. The room temperature must
not be less than 4 °C (39 °F).
NOTICE
Risk of product damage due
to condensation!
> Leave the unit switched off for a few hours
if it has previously been moved from a cold
location to a warm location.
Safety instructions
DANGER
Risk of fatal electric shock!
> Do NOT remove individual shower-toilet
components.