EU heat pumps
11
4. Use and operation
4.1 Features of the LED control panel
With the “On/Off” key “ “, the heat pump is turned on or turned off (stand-by status). If the LED next to this
key lights up, the heat pump is turned ON.
Setting the desired temperature of the swimming pool water is achieved with the arrow keys, regardless if the
heat pump is turned ON or OFF. You simply press the arrow keys to set the desired temperature
directly
.
•
When the unit is turned ON and is running, the temperature of the swimming pool water can be read off the
LED screen.
•
When the unit is turned ON and the desired temperature is reached, “OFF” appears on the LED screen.
•
When the unit is turned OFF, “OFF” is always displayed on the LED screen; the heat pump goes on
monitoring all parameters of the system and all protection systems remain active. The heat pump is thus in
STAND-BY mode. We will continue using this expression if we wish to indicate that the heat pump is
turned OFF.
4.2 Setting the parameters
Parameters can always be checked by pressing the service key
“
”, regardless if the pump is turned ON or is in
STAND-BY mode.
Only
in STAND-BY mode can the parameters be modified.
This is an overview of the different parameters and their standard values.
Press “
or
” to
modify settings
On/Off
Set start time
Set stop time
Press “CLOCK” to set the
time
Press “MODE” to set the
operating mode
LED screen
Access to parameters
