DURAG D-R 290, Operating Manual

Page: 34 / 202

3 | Delivery
34 D-R 290
Scope of supply of the typical overall D‑R 290 system:
Quantity re­
quired per
system
Equipment
2 pieces D‑R 290 welded-in pipes with adjustment flange
material 1.0037 ST37, pitch circle diameter 100 mm,
hose outside Ø 65 mm, tube length 200 mm
1 piece Individual test certificate for the delivered device
Table 3.1: Typical scope of supply D‑R 290
Item no. Operating manual in
4 009 351 German
4 009 352 English
x xxx xxx
State the language (check availability)
Standard for deliveries outside the EC is English,
unless specified otherwise!
Table 3.2: Operating manual
(Illustrations may differ from the actual appearance.)
Optional equipment
Article
number
Equipment
1 piece D‑R 290 M measuring head:
Pitch circle diameter 150 mm
1 piece D‑R 290 R reflector:
Pitch circle diameter 150 mm
4 004 908 e.g.
D-TB 100 supply unit
(terminal box)
for an individual sensor, incl.
mains adaptor 90-264V~, 24V ,
2A
 box with 6x cable
glands M20x1.5
and 21 terminals
 connecting cable with
17-pin M23 socket
see below
A -0 -0 -6 -B
3.3.2