DURAG D-R 290, Operating Manual

Page: 134 / 202

7 | Checking / setting parameters with D‑ESI 100
134 D-R 290
Zero range positive active
Zero range negative active
Zero range positive active - Zero range negative active
A Measured value B Corrected measured value in the
zero range
C Zero Range
Table 7.7: Measured value output channel
|ZR| = Zero Range value
Variable: Zero Range (value)
Example: Assignment of the device outputs
Current output
The measuring head has available a analogue output (0)4..20mA with "live zero". The
setting is performed as follows:
Setting path:
Sitemap > »Device (e.g. D‑R 290 ) > >
Common Parameters > analogue
output and relay settings > [PARAMETER] >
Fig. 7.9: Setting the analogue output
7.6
7.6.1